13468378666 7×24-hour service hotline
| Actions | Basic Information | Basic Dimensions | Mounting Dimensions | Shoulder Dimensions | Basic Load Ratings | Precision & Clearance | Weight & Speed | Brand Cross-Reference | Assembly Parameters | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PDF Download | Inquiry | Model | Series | Nominal Model | Inner Diameter d (mm) |
Outer Diameter D (mm) |
Height H/B (mm) |
H/B (mm) |
B1 (mm) |
dp (mm) |
Roller Pitch Circle Diameter Dpw (mm) |
T (mm) |
H2 (mm) |
S (mm) |
C (mm) |
C1 (mm) |
d1 (mm) |
D1 (mm) |
D2 (mm) |
dn (mm) |
dm (mm) |
d2 (mm) |
d3 (mm) |
L1 (mm) |
L2 (mm) |
L3 (mm) |
Chamfer rmin (mm) |
R Fillet Radius |
Inner Ring do (mm) |
Inner Ring ds (mm) |
Inner Ring Ts (mm) |
Inner Ring Mounting Hole Size Seal Back Side |
Inner Ring Mounting Hole Size 2 |
Inner Ring Mounting Dimensions |
Inner Ring Mounting Hole Center Diameter PCD₁ |
Inner Ring Mounting Hole Center Diameter dn (mm) |
Inner Ring Mounting Hole Center Diameter dL (mm) |
Inner Ring Mounting Hole Size 1 |
Inner Ring Mounting Hole Size Seal Front Side |
Inner Ring N | Inner Ring n-ΦN |
Inner Ring n-ΦQ3 |
Outer Ring Mounting Dimensions |
Outer Ring Mounting Hole Center Diameter PCD₂ |
Outer Ring Mounting Hole Center Diameter dm (mm) |
Outer Ring Mounting Hole Size 1 |
Outer Ring Mounting Hole Size 2 Seal Back Side |
Outer Ring W1 | Outer Ring n-ΦW1 |
Outer Ring n-ΦQ1 |
Outer Ring W2 | Outer Ring n-ΦW2 |
Outer Ring n-ΦQ2 |
Outer Ring dL (mm) |
Shoulder Dimensions ds (mm) |
Shoulder Dimensions Dh (mm) |
Radial Static Load Cor (N) |
Radial Dynamic Load Cr (N) |
Axial Static Load Coa (N) |
Axial Dynamic Load Ca (N) |
Dynamic Load Radial (kg) |
Dynamic Load Axial (kg) |
Limit Load Radial Static Load (N) |
Limit Load Radial Dynamic Load (N) |
Thrust (N) |
Moment Static Load (N·m) |
Moment Dynamic Load (N·m) |
Moment (N·m) |
Standard Radial Clearance |
Inner Ring Runout | Outer Ring Runout | Weight (g) |
Weight (KG) |
Limit Speed Grease Lubrication (r/min) |
Bearing Friction Torque (Nm) |
NTN | INA | KAYDON | Inner Ring Quantity | Outer Ring Quantity | Connecting Screw Quantity |
Lifting Hole G | Lifting Hole Quantity | Pitch t Quantity×t |
Screw Tightening Torque MA (Nm) |
Compatible Reducer Type |
| PDF Download | Inquiry | SHF(SHG)14 | — | — | 38 | 70 | 15.1 | 13.7 | — | — | — | — | — | — | 14.1 | — | 57 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 6.8 | 5.9 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 0.25 | — | — | — | — | — | — | — | — | — | — | — | — | — |
| PDF Download | Inquiry | SHF(SHG)17 | — | — | 47 | 80 | 17 | 16.4 | — | — | — | — | — | — | 16 | — | 68.1 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 13.5 | 9.8 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 0.37 | — | — | — | — | — | — | — | — | — | — | — | — | — |
| PDF Download | Inquiry | SHF(SHG)20 | — | — | 54 | 90 | 18.5 | 17.5 | — | — | — | — | — | — | 17.5 | — | 79 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 25.6 | 18.5 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 0.48 | — | — | — | — | — | — | — | — | — | — | — | — | — |
| PDF Download | Inquiry | SHF(SHG)25 | — | — | 67 | 110 | 20.7 | 19.7 | — | — | — | — | — | — | 18.7 | — | 94.8 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 28.9 | 20.6 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 0.76 | — | — | — | — | — | — | — | — | — | — | — | — | — |
| PDF Download | Inquiry | SHF(SHG)32 | — | — | 88 | 142 | 24.4 | 23.4 | — | — | — | — | — | — | 23.4 | — | 123 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 46.3 | 29.8 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 1.55 | — | — | — | — | — | — | — | — | — | — | — | — | — |
| PDF Download | Inquiry | SHF(SHG)40 | — | — | 108 | 170 | 30 | 28.5 | — | — | — | — | — | — | 29 | — | 148 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 70.5 | 45.6 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 2.68 | — | — | — | — | — | — | — | — | — | — | — | — | — |
| PDF Download | Inquiry | SHF(SHG)50 | — | — | 135 | 214 | 36 | 34.5 | — | — | — | — | — | — | 34 | — | 188 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 147.8 | 75.2 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 5.11 | — | — | — | — | — | — | — | — | — | — | — | — | — |
HOMVIP specializes in the research and manufacturing of precision cross roller bearings, equal section thin-walled bearings, and harmonic reducer bearings. Our products are exported to more than 50 countries and regions worldwide.
Learn more >
All rights reserved. © 2026 Shandong Hangmu Precision Manufacturing Co., Ltd|
Technical Support：Shandong Hangmu Precision Manufacturing Co., Ltd|Sitemap